Hey friends!
Here’s a quick and easy pattern for crochet bootie slippers! I came up with this pattern several years ago when I wanted an easy pattern for booties that works up quickly so I could make several pairs for myself to use over the cold season.
They are thick, warm, comfortable, and wear well throughout the season. I even wear them outdoors on the concrete and garden paths (yes, really).
This is the first season I used cotton yarn to make them, and it worked out quite well. In the past, I’ve used acrylic yarn and it works well too- I just used the cotton yarn this year because I have so much of it!
So without further ado, here’s the pattern! I’ll write it out first in it’s entirety, then I’ll break it down with pictures.
Bootie Slippers Free Crochet Pattern
Yarn: 2 Balls Lily Sugar ‘n Cream Cotton Yarn (I used Country Brown Ombre) where to buy
You can also use any worsted weight acrylic yarn (I like Red Heart Super Saver for this pattern) where to buy
I make a small commission at no additional cost to you from purchases made through links on this page. Your purchases through links on this page makes it possible for me to keep blogging and bringing you all the great content you see here on The Painted Hinge! 🙂
Entire pattern is worked holding 2 strands of yarn together.
Supplies: Crochet Hook size L / 8mm
Crochet Abbreviations Used in This Pattern:
ch = chain
r(s) = round(s)
sl st = slip stitch
st(s) = stitch(es)
sk = skip stitch
Gauge: When working in the round, 9 sc = 4 inches and 11 rows of sc = 4 inches. Use whatever size crochet hook needed to achieve this gauge. For best results, please check your gauge before beginning this pattern.
Sizing: US women’s size Small (5-6), Medium (7-8), and Large (9-10). When different stitches are used to obtain the correct size, the stitches will be shown as (S, M,) L. These are very forgiving size-wise, so don’t fret too much if you are not sure about the sizing.
Please note: These booties tend to stretch out a bit when worn (especially with the acrylic yarn) but will shrink down again once washed.
Form foot:
ch 5 s tightly; join with sl st to form loop.
*ch 1, sc 1 in loop* repeat between * 6 times. (12 s)
sc once around r. (12 s)
sc; *sc, ch1,* sc; repeat between * (8, 9,) 10 times. ((18, 20,) 22 s)
sc for (10, 12,) 14 rows.
Form foot opening:
ch 1, turn.
*sc (18, 20,) 22; ch 1, turn* repeat between * (4, 6,) 6 times.
Form heel:
sc (7, 8,) 9, sk 1, sc 2, sk 1, sc (7, 8,) 9. (16, 18,) 20 s
sc (6, 7,) 8, sk 1, sc 2, sk 1, sc (6, 7,) 8. (14, 16,) 18 s
Close up back of slipper:
sc (7, 8,) 9; turn slipper wrong side out.
sl st seam closed; turn slipper right side out.
Finish opening:
sc around opening.
Cut yarn, tie off and weave in ends.
Here’s the step-by-step breakdown. The pictures show the pattern being worked from left to right because I am left handed. It can be worked either left to right or right to left and achieve the same results.
Form foot:
ch 5 s tightly; join with sl st to form loop:
*ch 1, sc 1 in loop* repeat between * 6 times. (12 s):
sc once around r. (12 s).
sc; *sc, ch1,* sc; repeat between * (8, 9,) 10 times. ((18, 20,) 22 s).
sc for (10, 12,) 14 rows:
If it’s possible, try this on yourself or whoever you’re working this up for to get a custom fit:
Form foot opening and decrease to form a rounded heel:
ch 1, turn.
*sc (18, 20,) 22; ch 1, turn* repeat between * (4, 6,) 6 times.
sc (7, 8,) 9, sk 1, sc 2, sk 1, sc (7, 8,) 9. (16, 18,) 20 s
sc (6, 7,) 8, sk 1, sc 2, sk 1, sc (6, 7,) 8. (14, 16,) 18 s:
Close up back of slipper:
sc (7, 8,) 9; turn slipper wrong side out.
sl st seam closed; turn slipper right side out.
Here’s how the back of the slipper looks once it’s closed up:
Finish opening:
sc around opening.
Cut yarn, tie off and weave in ends:
That’s it! I hope you enjoyed this pattern!
Don’t forget to check out my other free crochet patterns!
Okay I love them, thank you for sharing the pattern.
You’re welcome Robbie! 🙂 Thank you for your comment!
Muchas gracias por compartir.
Thank you so much for sharing.
You’re very welcome Margarita!
This is a very cute pattern; however, I don’t understand this line: sc, ch 1, turn (4, 6,) 6 times. It would be helpful if you would add a pic after that line is complete and before you move on to the last two rows.
Hi Claudia!
I changed the line to: *sc (18, 20,) 22); ch 1, turn* repeat between * (4, 6,) 6 times. I hope this makes more sense.
The pic for this instruction and the following two rows would be pretty much the same; the only difference is that you are decreasing for the heel.
Thank you for your feedback and I’m glad you like the pattern! 🙂
Incredible! Thank you so much, I have been searching for a pattern to make slippers like this for quite a while and couldn’t find a good one until now! This is only my 5th or so project (it’s a great pasttime while pregnant!)
I altered the cuff a little bit, my hubby wanted higher slippers, and came up with something like this:
Finish opening: may be slightly different depending on size
hdc 12, hdc2tog x 2, hdc 9 sl st
ch 2 hdc 23 sl st
*ch2hdc 22 sl st* repeat between * until desired height is reached
hdc-ing 2 together made it a bit tighter and more form fitting around the top of the foot. The hdc for me was a little random because I think I may have skipped a few of the openings but nevertheless, do what works for you. The goal is to have the hdc2tog x 2 in the center of the top of the foot just to tighten it up a bit.
Again, thank you so much this is a wonderful and easy to follow pattern
Thank you for your feedback Ashley! 🙂 I’m glad you were able to easily modify the pattern for your husband. I was thinking about modifying this pattern to include a cuff, or maybe even do the pattern in sport weight yarn with a cuff for a sock pattern, so your feedback really helps! 🙂
Hi, Very cute pattern. What do you put on the bottom of the slippers to keep them from slipping and sliding on hardwood/tile floors?
Hi Lynn!
I haven’t put anything on the bottom of these to prevent slipping. I have tile/wood throughout my house, and when I wear these I treat it like I’m wearing just socks. I do find the cotton yarn is way less slippery than acrylic yarn.
With that said, I think your question is a very good one and needs to be addressed, so I’m going to throw it out to my readers. Does anyone have any ideas on this? If so, please reply below! 🙂
For a non-slip bottom use kitchen shelf liner, cut to fit and whip stitch into place.
Wonderful idea Tana! Thanks for sharing! 🙂
Keep the great ideas coming everyone!
I’ve been told to use that puss stitch glue stuff..so tomorrow Iam going to the craft shop and get some♡♡ these slippers ARE quick and easy and everyone can add the extra cuff’s of choice with it IF they choose too ????????????????????
Thank You Michelle♡♡♡
You’re welcome Cheryl! I’m glad you like the pattern!
Hot glue beads on the sole help with slipping
These are so awesome, Im glad you have posted it. I find it hard to crochet other booties the require to start in a line. I love them!!!!!!!!!!!! thank you.
You’re welcome Amanda! 🙂 I aimed to keep this pattern simple, so I’m happy people are finding it as such!
I was searching for a way to make flexible shoes for my youngest child and wanted a non slip sole for them. A friend then pointed out the rolls of non slip mat that you can buy to make placemats ect. It is rubbery and soft enough to sew onto items as well as flexible. Just have to cut out foot shapes to the desired size. Thought that I’d throw that idea out there. 🙂
That’s a wonderful idea Sarah-Jayne! Thanks so much for sharing! 🙂
Hi, Can’t wait to make these for myself. They look perfect. Am wondering what size hook you used as I didn’t see it mentioned. Will also start with a magic ring for a tighter end. Also thinking of leaving the back seam on the outside just for something different. Anxious for the reply. Thanks for the pattern
Hi Connie,
The hook size is a L / 8mm. The hook size was included when I originally posted it, but something must have caused a glitch when I moved from my old URL to this one. All fixed now! 🙂
I have not tried this yet but have been doing a lot of thinking about it. How would a few drops of caulking work on the bottoms of these to keep from sliding? Like the stuff around the bathtub. It comes in clear and white. Would it be washable? I think so but I do not know for sure. I will try it one of these days. Thank you very much for the pattern. They look so nice and warm. Would be great here in our Upper Michigan winters.
You’re welcome Cindy! 🙂 I think that might work, and it probably would stay on through washing- it’s pretty tough stuff. I’d put it in a delicates bag before throwing it the wash just in case- at least for the first time to see how it holds up. Thanks for a great idea, and when you try it, let me know how it works out! 🙂
Okay, I feel really stupid here… If I do the ” sc; *sc, ch1,* sc; repeat between * (8, 9,) 10 times” doing the sc, ch1 each time around, in each stitch and each ch, it keeps getting bigger and bigger. I don’t usually have a problem with patterns. Are the stitches supposed to be done in the ch 1 spaces? I’ve read all of the comments, and it seems everyone’s got it except me. Ouch! 🙂
Hi Wendy!
Please don’t feel stupid- if you’re new to making booties this way it can be a bit counterintuitive. You are actually doing it correctly if it’s getting bigger… this is part of the bootie that expands over the toes. Once you get to this part: sc for (10, 12,) 14 rows- that is the part that extends from the bottom of the toes across the foot to the ankle. I see where I have the directions with the pics that I included the part you’re confused about before it is actually done in the pics; maybe that’s what’s messing you up! 🙂 I’m going to correct that in the post once I finish writing this.
I hope this helps! Let me know if it doesn’t or if you have any more questions!
Hi! Question about this pattern 1) when maki g custom fit at what point should I start to form foot opening? Do I crochet all the way to where top of foot meets leg? 2) when forming foot directions say “sc;*sc ch1* sc; repeat between*(8 9) 10 times. (18,20) 22 s. So I’m making med size so I did this 9 times but shouldn’t I end up with 21 stitches instead?
Hi Carol! The answer to your first question is yes. The answer to your second question is no… since the repeated stitches are done in twos (sc, ch1 = 2 stitches) you should have 22 stitches at the end of the round. I hope that helps! 🙂
Thanks for your response! I’m new to reading patterns and quite frankly they drive me crazy. I see where I got confused. The instructions say while forming the foot”” sc; *sc, ch1,* sc; repeat between * (8, 9,) 10 times. ((18, 20,) 22 s)
So I crocheted 1 sc then I * sc ch1* 9 times then I sc. So that gave me 21.
Thanks for your advice. Do you see why I misinterpreted?
Yes, I can see how it could be misinterpreted. I’m happy I was able to clear it up for you! 🙂
Your pattern is genius! Why?Because it’s not complicated and it works! I’m making slippers using a different pattern and its too complicated! All this joining stuff. Ugh! I’m going to figure out how to adapt your pattern for men.
Thanks again!
You’re very welcome Carol! I’m glad it’s working for you now! 🙂
Thank you for sharing your pattern.
I am anxious to start making a pair .🤗
You’re very welcome Jeanne!
so when it says do so many rows to make foot is each round suppose to stay at 22 stitchs. then go on to make heel…
Hi Donna! Yes, each round is supposed to stay 22 inches.
I can wait to make this .. im new to making any think so im going tomake this thanks
You’re very welcome Mary!
Hello Michelle,
I’m very new to crocheting. I feel stupid for asking but can you please tell me what the symbols mean?
*sc (18, 20,) 22; ch 1, turn* repeat between * (4, 6,) 6 times
*sc and the meaning of the *
also what are the parentheses for (18, 20)
Thank you for your patience and help as I’m eager to make these! 🙂
I am so sorry Venita – somehow I missed this comment from you so long ago! I hope you figured out the symbols and were able to make the pattern. If not, please hit me up again! Happy New Year!
It seems like 14 rows up to the top of the foot, + 6 more rows + 2 more rows to finish off doesn’t make for a very large opening to get your foot in. I’m baffled by the sizing of that opening.